Continental Trade Sp. z o. o.

Armature

For circular frames

If you need additional lighting for viewing inside of the boiler, silos, tank, etc.  a special overlay can be used. This overlay can be used with combination of sight glass and light glass.

Depending on the working conditions must be selected appropriate material and method of fixing lighting to sight glass frame. Please note that some luminaires are suitable for use in explosive environments. Luminaries are suitable for use in food processing. Most of lighting is available in LED technology. 

Intended for non-hazardous environment (non Ex) . After properly installed installation, the luminaires are dust and waterproof, meeting the requirements of IP 65 and EN 60 529 / DIN VDE 0470 part 1.

The maximum permissible ambient temperature measured in the cable gland (cable) is 80 ° C. When the ambient temperature exceeds 40 ° C,  heat resistant cable (e. g. type Sinotherm 110 H05GG-F 3G 1,5 mm2) must be fitted..

Note: When using a version with LED lighting, the maximum ambient temperature must not exceed 40 ° C.

All lighting fittings listed below can be combined into the following groups:

  • Lumistar Half moon luminaries (Lumistar, SLM, ME)
  • Lumistar Sight Glass luminaries , aluminium (USL 05, 06, 07)
  • Lumistar Sight Glass luminaries , stainless steel (ESL 25, 26, 27; USL 01, 03, 13, 15, 16)
  • Sterile Technology: Lumistar Sight Glass luminaries , stainless steel (USL 31, 33. 35, 36) 
    Sight glass fittings with integrated lighting for aseptic and sterile environments in the biotechnology, pharmaceutical, food processing and chemical industries. More information: read Steril technology_EN.pdf.
  • LED-Technology: Lumistar Sight Glass luminaries (ASL 55, 57, ESL 51, 53, 55, Lumistar 225, USL 05, 07, 15, 35)
  • UL - listed Lumistar Sight Glass luminaries (USL 13-UL, 15-UL, 33-UL, 35-UL)
    International certification organization UL (www.ul.com) is testing devices in terms of safety. Products appearing on the UL list (UL-listed) are products of very high quality guaranteeing safety. The products in this group have successfully passed the UL certification and are listed on the UL list

More information is provided in the description of individual luminaries. Expand one of the following tabs.

Luminaire Lumistar
Lumiglas Luminaire Lumistar
Also available in LED-technology

The classic 'half moon' version for combined sight and light glass
Suits Lumiglas Sight Glass Fitting, circular DIN 28120 or similar

Nominal dia: DN 50 to DN 200
Operating voltage: 24V AC/DC, 12V / 230V on request
Power, depending on size: 20W, 50W or 100W
Standard product with momentary push button

     

Downloads

Luminaire SLM, aluminium
Luminaire SLM, aluminium
Also available in LED-technology

A version of the 'Lumistar' adapted for use with
Lumiglas Screwed Sight Glass Fitting MV

Nominal dia: DN 65 to DN 125
Operating voltage: 24V AC/DC
Power, depending on size: 20W, 50W or 100W
Luminaire is fastened to branch nozzle by slotted cover nut
Standard product with momentary push button
Model in stainless steel available, refer to Lumistar Luminaire 'ME'

     

Downloads

Luminaire ME, stainless steel
 Luminaire ME, stainless steel
Also available in LED-technology

A stainless steel version of the 'Lumistar' adapted for use with
Lumiglas Screwed Sight Glass MV

Nominal dia: DN 65 to DN 125
Operating voltage: 24V AC/DC
Power, depending on size: 20W or 50W

Luminaire is fastened to branch nozzle by slotted cover nut
Standard product with momentary push button

     

Downloads

Luminaire USL 05, aluminium
Luminaire USL 05, aluminium
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass
Compact yet powerful light

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121
or similar from size DN 40 and Lumiglas Screwed Sight
Glass Fitting MV from DN 65

Operating voltage/power: 24V / 20W or 50W (without internal
transformer) 120V / 230W, 12V / 5W (with internal transformer)
Secured by hinged bracket or adapter flange

     

Downloads

Luminaires USL 05 LED, aluminium
Luminare USL 05 LED, aluminium

This sight glass luminaire is designed for universal applications
and is ideal either in combined sight and light ports
(single- flange version) or for separate ports (two-flange version).

     

Downloads

Luminaires USL 06, aluminium
Luminaires USL 06, aluminium
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass.

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121
or similar from size DN 50 and Lumiglas Screwed Sight Glass
Fitting MV from DN 65 to DN100

Operating voltage: 12V, 24V, 120V, 230V
Power, dependant on operating voltage, up to 100W
Secured by hinged bracket or adapter flange.

     

Downloads

Luminaire USL 07, aluminium
Luminaire USL 07, aluminium
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass
Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121
or similar from size DN 50 and Lumiglas Screwed Sight Glass

Fitting MV DN 100/125
Operating voltage: 12V, 24V, 120V, 230V
Power, dependant on operating voltage, up to 100W

Secured to sight glass flange by twin brackets fastened
This Luminaire has a particularly large light exit and reflector

.

     

Downloads

Luminaire USL 07 LED, aluminium
Luminaire USL 07 LED, aluminium

This sight glass luminaire is designed for universal applications
and is ideal either in combined sight and light ports (single-flange version)
or for separate ports (two-flange version).

Glare-free illumination; fits circular sight glass fittings to
DIN 28120/DIN 28121 or similar, screw-type sight glass fittings in
compliance with DIN 11851, as well as visual flow indicator fittings.

     

Downloads

Luminaire ESL 25, stainless steel
Luminaire ESL 25, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, all stainless steel Compact yet powerful light

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar
from size DN 40 and Lumiglas Screwed Sight Glass Fitting MV from DN 65
Operating voltage/power: 12V, 24V / 20W, 50W (without internal transformer)
120V / 230W, 12V / 5W or 10W (with internal transformer)

Secured by hinged bracket or adapter flange
Modyfied by an inside mounting flange specially for Aseptik Technology

     

Downloads

Luminaire ESL 26, stainless steel
Luminaire ESL 26, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, all stainless steel

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV from DN 65 to DN100

Operating voltage: 12V, 24V, 120V, 230V, 240V
Power, dependant on operating voltage, up to 100W
Secured by hinged bracket or adapter flange

     

Downloads

Luminaire ESL 27, stainless steel
Luminaire ESL 27, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, all stainless steel

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV from DN 100 to DN 150

Operating voltage: 12V, 24V, 120V, 230V, 240V
Power, dependant on operating voltage, up to 100W
Secured by hinged bracket or adapter flange
Modyfied by an inside mounting flange specially for Aseptik Technology

     

Downloads

Luminaire USL 01, stainless steel
Luminaire USL 01, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, 
super compact, all stainless steel

Suits all Lumiglas Sight Glass Fittings from size DN 25
Operating voltage/power: 12V, 24V / 5W, 20W
Secured by mounting clamp (for SW I) or hinged bracket

     

Downloads

Luminaire USL 03, stainless steel
Luminaire USL 03, stainless steel
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass,
super compact, all stainless steel

Suits all Lumiglas Sight Glass Fittings from size DN 25
Operating voltage/power: 12V, 24V / 20W, 50W
Secured by hinged bracket

     

Downloads

Luminaire USL 13, stainless steel
Luminaire USL 13, stainless steel
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, 
compact, all stainless steel

Suits all Lumiglas Sight Glass Fittings from size DN 25
Operating voltage/power: 12V, 24V, 120V / 20W, 50W
Secured by hinged bracket

     

Downloads

Luminaire USL 15, stainless steel
Luminaire USL 15, stainless steel
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass, 
compact, all stainless steel

Suits all Lumiglas Sight Glass Fittings from size DN 50
Operating voltage/power: 12V, 24V, 120V / 20W, 50W, 100W,
with transformer 120V, 230V / 5W, 10W
Secured by hinged bracket

     

Downloads

Luminaire USL 16 and USL 36, stainless steel
Luminaire USL 16 and USL 36, stainless steel
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass,
compact, all stainless steel

Suits all Lumiglas Sight Glass Fittings from size DN 40
Operating voltage/power: 24V, 120V, 230V / 20W, 50W, 100W,
with transformer 230V /20W
Secured by hinged bracket or adapter flange.

     

Downloads

Luminaire USL 31, stainless steel
Luminaire USL 31, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover glass,
compact, all stainless steel

Outside diameter: 24 mm
Light output = 14 mm
Operating voltage/power: 12V / 5W or 24V / 20W.

     

Downloads

Luminaire USL 33 and USL 35, stainless steel
Luminaire USL 33 and USL 35, stainless steel
Also available in LED-technology

Fully Sealed Lumistar Sight Glass Luminaire with cover glass,
compact, all stainless steel
Suits for sanitary sight glass fittings with METAGLASS in
Bio-Control or NA-Connect fittings

Operating voltage/power:
12V, 24V, 120V, 230V / 20W, 50W, 100W.

     

Downloads

Luminaire USL 15-LED and USL 35-LED, stainless steel
Luminaire USL 15-LED and USL 35-LED, stainless steel
Also available in LED-technology

Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical
and/or biological processes
Extreme high-contrast lighting.

     

Downloads

Luminaire ESL 51-LED, stainless steel
Luminaire ESL 51-LED, stainless steel

Ideal combination of flush design and smooth surface:
This sight glass luminaire is designed for mounting
on sight glass fittings in universal applications. 
It is practical either in combined sight and light ports
(single-flange version) or with separate ports (two-flange
version). Integrated fastening clamp enables attachment to
Lumiglas wiper unit SW I.

     

Downloads

3D Data (Download as ZIP):

Luminaire ESL 53-LED, stainless steel
Luminaire ESL 53-LED, stainless steel

Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical
and/or biological processes
Extreme high-contrast lighting

     

Downloads

3D Data (Download as ZIP):

Luminaire ESL 55-LED, stainless steel
Luminaire ESL 55-LED, stainless steel

Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical
and/or biological processes
Extreme high-contrast lighting

     

Downloads

Luminaire Lumistar 225-LED, aluminium
Luminaire Lumistar 225-LED, aluminium

For mounting on Lumiglas Sight Glass Fitting, circular DIN 28120 DN 200
Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical and/or biological processes
Extreme high-contrast lighting

     

Downloads

Luminaire ASL 55-LED, aluminium
Luminaire ESL 55-LED, stainless steel

Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical and/or biological processes
Extreme high-contrast lighting

     

Downloads

Luminaire ASL 57-LED, aluminium
Luminaire ASL 57-LED, aluminium

Insensitive to vibration
No heat radiation in the light port (cold light)
No additional heat which would be undesirable for chemical and/or biological processes
Extreme high-contrast lighting

     

Downloads

Luminaires USL 13-UL and USL 33-UL, stainless steel
Luminaires USL 13-UL and USL 33-UL, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with
cover glass, compact, all stainless steel

Suits all Lumiglas Sight Glass Fittings from size DN 25
Operating voltage/power: 12V, 24V, 120V / 20W, 50W

     

Downloads

Luminaire USL 15-UL and USL 35-UL, stainless steel
Luminaire USL 15-UL and USL 35-UL, stainless steel

Fully Sealed Lumistar Sight Glass Luminaire with cover
glass, compact, all stainless steel
Suits all Lumiglas Sight Glass Fittings from size DN 50

Operating voltage/power: 12V, 24V, 120V /
20W, 50W, 100W, 
with transformer 120V, 230V / 5W, 10W

     

Downloads

 

This Ex-type sight glass luminaires are designed for universal applications in potentially explosive (Ex) environments. For illuminating the interior of tanks, hoppers, silos, agitators and other - normally closed - vessels and reactors as well as visual flow indicators in potentially explosive environments.
Gas: Zones 1 and 2, Dust: Zones 21 and 22.

Suitable for use in food processing industries.

Note: When using a version with LED lighting, the maximum ambient temperature must not exceed 40 ° C.

Note: Where the Luminaire is to be used in explosion hazardous areas, connection must be to an intrinsically safe power supply circuit.

All lighting fittings listed below can be combined into the following groups:

  • Fully Sealed Sight Glass Luminaires, Aluminium (USL 05, 06, 07, 08) -Ex
  • Fully Sealed Sight Glass Luminaires, Stainless Steel (ESL 25, 26, 27) -Ex
  • LED-Technology: Round Ex-Sight Glass Luminaires (ASL 55, 57; ESL 55)LED -Ex
  • Ex Fibre Optic Luminaire (USL 07, 08; ESL 55LED) ALF-Ex

More information is provided in the description of individual luminaries. Expand one of the following tabs.

Luminaire USL 05-Ex, USL 05-Ex-LED, aluminium
Luminaire USL 05-Ex, USL 05-Ex-LED, aluminium
Also available in LED-technology

ex II 2G Ex d IIC T3/T4/T6/120°C Gb
ex II 2D Ex tb IIIC T80/T120/T130/T195°C Db

Suitable for Explosion hazardous areas: Temperature Class: to T6
(depending on power rating)
Ambient temperature: up to 60°C

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or
similar from size DN 40 and Lumiglas Screwed Sight Glass Fitting MV
from DN 65

Operating voltage: 12V, 24V, 120V, 230V
Power, depending on voltage: up to 20W
Secured by hinged bracket or adapter flange

     

Downloads

Luminaire USL 06-Ex, aluminium
Luminaire USL 06-Ex, aluminium

ex II 2G Ex d (e), IIC T3/T4 Gb
ex II 2D Ex tb IIIC T195°C/T130°C/T120°C/T80°C Db

Suitable for Explosion hazardous areas
Temperature Class: to T4(depending on power rating)
Ambient temperature: up to 60°C II C (all explosion classes)

Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or
similar from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV
from DN 65 to DN100

Operating voltage: 12V, 24V, 120V, 230V, 240V
Power, depending on voltage: up to 50W
Electric connection:
  Version  I: resin cast gland/cable tail,
  Version II: terminal box and cable gland
Secured by hinged bracket or adapter flange

     

Downloads

Luminaire USL 07-Ex, aluminium
Luminaire USL 07-Ex, aluminium
Also available in LED-technology

ex II 2G Ex d (e), IIC T3/T4 Gb
ex II 2D Ex tb IIIC T195°C/T130°C/T120°C/T80°C Db

Suitable for Gas(Zone 1) and Dust(Zone 21)Explosion hazardous areas
Temperature Class: to T6 or T80?C(depending on power rating)
Ambient temperature: up to 60°C II C (all explosion classes)
Suits Lumiglas Sight Glass Fitting, circular DIN 28120/28121 or similar
from size DN 50 and Lumiglas Screwed Sight Glass Fitting MV from DN 100/125

Operating voltage: 12V, 24V, 120V, 230V, 240V
Power, depending on voltage: up to 50W
Electric connection:
  Version  I: resin cast gland/cable tail,
  Version II: terminal box and cable gland
Secured to sight glass flange by twin brackets fastened
This Luminaire has a particularly large light exit and reflector

     

Downloads

Luminaire USL 07 LED-Ex, aluminium
Luminaire USL 07 LED-Ex, aluminium

ex II 2G Ex db eb IIC T6 Gb
ex II 2D Ex tb IIIC T80°C Db

This sight glass luminaire is designed for universal applications
in potentially explosive operating areas and is ideal either in
combined sight and light ports (single-flange version) or for
separate ports (two-flange version).

This Luminaire has a particularly large light exit and reflector

     

Downloads

Luminaire USL 08-Ex; T4A, T3B, aluminium
Luminaire USL 08-Ex; T4A, T3B, aluminium

Suitable for Explosion hazardous areas
Temperature Class: to T4A. Ambient temperature: up to 40°C
Ignition protection: Class 1, Div.1 & 2, Explosion Group: C & D

Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 50 and screwed sight glass fittings DIN 11851 from DN 100/125
Operating Voltage: 120V
Power rating: up to 100W
Secured to sight glass flange by twin brackets fastened

UL-listed
(Ex) Div. I, Div. II

     

Downloads

Luminaire ESL 25-Ex, stainless steel
Luminaire ESL 25-Ex, stainless steel

ex II 2G Ex d IIC T4/T6 Gb
ex II 2D Ex tb IIIC T130°/T80°C Db

Suitable for Explosion hazardous areas
Temperature Class: to T6(depending on power rating)
Ambient temperature: up to 60°C

Suits circular sight glass fittings to DIN 28120/28121 or similar
from size DN 40 and screwed sight glass fittings DIN 11851
from DN 65 Operating Voltage 12V, 24V, 120V, 230V
Power, depending on voltage: up to 20W
Secured by hinged bracket or adapter flange
modyfied by an inside mounting flange specially for Aseptik Technology

     

Downloads

Luminaire ESL 26-Ex, stainless steel
Luminaire ESL 26-Ex, stainless steel

ex II 2G Ex de IIC T3/T4 Gb
ex II 2D Ex tb IIIC T195°C T130°C Db
Suitable for Explosion hazardous areas

Temperature Class: to T4(depending on power rating)
Ambient temperature: up to 60°C
Suits circular sight glass fittings to DIN 28120/28121 or similar
from size DN 50 and screwed sight glass fittings DIN 11851
from DN 65 to DN100

Operating Voltage 12V, 24V, 120V, 230V, 240V
Power, depending on voltage: up to 50W
Electric connection: terminal box and cable gland
Secured by hinged bracket or adapter flange

     

Downloads

Luminaire ESL 27-Ex, stainless steel
Luminaire ESL 27-Ex, stainless steel

ex II 2G Ex de IIC T3/T4 Gb
ex II 2G Ex tb IIIC T195°C T130°C T80°C Db
Suitable for Explosion hazardous areas

Temperature Class: T4/50W; T6/20W
Ambient temperature: up to 40?C
Suits circular sight glass fittings to DIN 28120/28121 or similar
from size DN 50 and screwed sight glass fittings DIN 11851
from DN 100 Operating Voltage 12V, 24V, 120V, 230V, 240V

Power, depending on temperature class: up to 50 W
Secured by hinged bracket or adapter flange
modyfied by an inside mounting flange specially for Aseptik Technology

     

Downloads

Luminaire ESL 55-LED-Ex, stainless steel
Luminaire ESL 55-LED-Ex, stainless steel

ex II 2G Ex d IIC T6 Gb
ex II 2D Ex tb IIIC T80° Db
Suitable for Explosion hazardous areas

Temperature Class: to T6
Ambient temperature: up to 40°C
Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 40 and screwed sight glass fittings DIN 11851 from DN 65

Operating Voltage 24V, 120V-230V Power 11 W
Secured by hinged bracket or adapter flange
modyfied by an inside mounting flange specially for Aseptik Technology

     

Downloads

Luminaire ASL 55LED-Ex, aluminium
Luminaire ASL 55LED-Ex, aluminium

ex II 2G Ex d IIC T6 Gb
ex II 2D Ex tb IIIC T80°C Db
Suitable for Explosion hazardous areas

Temperature Class: to T6
Ambient temperature: up to 40°C
High operating time by Hi-Power LED's

Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 40 and screwed sight glass fittings DIN 11851 from DN 65
Operating Voltage 24V, 120V-230V
Power 11 W
Secured by hinged bracket or adapter flange

     

Downloads

Luminaire ASL 57LED-Ex, aluminium
Luminaire ASL 57LED-Ex, aluminium

ex II 2G Ex d(e) IIC T6 Gb
ex II 2D Ex tb IIIC T80°C Db
Suitable for Explosion hazardous areas

Temperature Class: to T6
Ambient temperature: up to 40°C
High operating time by Hi-Power LED's

Suits circular sight glass fittings to DIN 28120/28121 or similar from size DN 40 and screwed sight glass fittings DIN 11851 from DN 65
Operating Voltage 24V, 120V-230V
Power 11 W
Secured by hinged bracket or adapter flange

     

Downloads

Ex Light Guide Luminaire Lumiflex Type USL 07 ALF-Ex, aluminium
Ex Light Guide Luminaire Lumiflex Type USL 07 ALF-Ex, aluminium

ex II 2G Ex de IIC T6/T4 Gb
ex II 2D Ex tb IIIC T80°/130°C Db
For use in Ex-hazardous areas

Temperature class: up to T6
Ambient temperature: up to 60°C
for the localised illumination of process operations
at machines and internals of reactors; Specially developed
for Light guide duties
Power supply see data sheet

     

Downloads

Ex Light Guide Luminaire Lumiflex Type USL 08 LF-Ex, aluminium
Ex Light Guide Luminaire Lumiflex Type USL 08 LF-Ex, aluminium

UL-listed

For use in Explosion hazardous areas
Temperature class: T4 (60°C) & T5 (40°C)
Ignition protection: Class 1, Div.1
Explosion Group: C & D

For the localised illumination of process operations at machines and 
internals of reactors; Specially developed for Light guide duties
Power supply see data sheet

     

Downloads

       
Ex Light Guide Luminaire Lumiflex Type ESL55LED-ALF-Ex, stainless steel
Ex Light Guide Luminaire Lumiflex Type ESL55LED-ALF-Ex, stainless steel

ex II 2G Ex d IIC T6 Gb
ex II 2D Ex tb IIIC T80°C Db

For use in Ex-hazardous areas
Temperature class: up to T6
Ambient temperature: up to 50°C

For the localized illumination of process operations at machines 
and internals of reactors; Specially developed for Light guide duties
Power supply see data sheet

     

Downloads

Luminaire REL 01-Ex, stainless steel
Luminaire REL 01-Ex, stainless steel

ex II 2G Ex ia C T4/T5/T6 - intrinsically safe
ex I M2 Ex ia I Mb

The REL01 unit has been designed to fit snugly into the side of
rectangular / longitudinal sightglasses, length = 250 mm
The Luminaire REL 01 comes ready for fitting, 2 screws enable it
to be bolted straight onto the cover flange of the longitudinal sightglass.
Operating Voltage / Power: 24V / 2W

     

Downloads

Note: Where the Luminaire is to be used in explosion hazardous areas, connection must be to an intrinsically safe power supply circuit.

  • For Non-Ex environment
  • For Ex environment

While every attempt has been made to verify the source of the information, no responsibility is accepted for accuracy of data.

Information clause

What personal data are processed and who is their administrator?

When using our services, personal data that we process may be, for example, the IP address of your device, data obtained from cookies or similar mechanisms for recording information in Users' devices, as long as they allow you to identify you. More information about the scope of personal data and cookies can be found in the Cookies policy and in Privacy policy.

Administrator, ie the entity deciding on which personal data will be processed and for what purpose, and in what way, is Continental Trade Sp. z o.o. (hereinafter "Continental Trade" or "We") with its registered office and address in Warsaw at Krasnobrodzka Street 5.

What is the purpose and basis of the processing of your personal data by Continental Trade ?

Continental Trade processes your personal data to enable you to use our services, match the displayed content and ads to your interests, measure quality and effectiveness, improve content and services.

The basis for the processing of personal data is the legitimate interest of Continental Trade. It includes improving services, ensuring their best quality and informing Users about them.

Confirming that you have read this information,   by clicking on "Go to website" or closing this window at the same time you agree that your personal data will be processed in the same way as described here. You can manage your consent, including withdrawal.

Providing personal information is voluntary.

What are your rights to   Continental Trade in terms of processed data?

You can request from Continental Trade: access to data, rectification, deletion, transfer and, in some cases, processing restrictions, and you have the right to object to the processing of your personal data when personal data are processed on the basis of the legitimate interest of the administrator. You have the right to file a complaint regarding the processing of your personal data to the President of the Office of Personal Data Protection.

To whom does Continental Trade share your personal data?

Continental Trade, in principle, does not share your personal data with third parties, except for situations in which Continental Trade has a legal basis, including at the request of authorized entities, or when it is necessary to perform services offered by Continental Trade, e.g. entrepreneurs providing hosting of our services.

How long does Continental Trade store your personal data?

Continental Trade stores Users' personal data only for the time that is necessary to achieve the purposes for which the data was collected and provided that one of the legal grounds described above is up-to-date or when a new ground has appeared, e.g. a law or the need to enforce claims in court proceedings.

Who can you contact for more information on the processing of personal data by Continental Trade?

If you have questions related to the processing of your personal data on websites operated by Continental Trade or would like to report the issue related to the processing of personal data by Continental Trade, you can contact a Continental Trade representative using the contact information: office@continentaltrade.com.pl.

More information on the protection of your personal data can be found in the Cookie Policy and Security Policy documents published on our website www.continentaltrade.com.pl