Continental Trade Sp. z o. o.

Sealing

GAMBIT gasket sheet

Quick selection table

Name Temperature
max. [°C]
Pressure
max. [bar]
Application
Gambit AF-153 130 40 Low-parameter sheet, recommended mostly for water supply and sewage mains
Gambit AF-200 G 250 80 High parameter sheet, high elasticity. Recommended for applications with steam.
Gambit AF-200 Universal 180 60 Versatile, oil resistant sheet designed for applications with the majority of media under medium temperatures and pressures.
Gambit AF-202 150 40 Popular sheet designated for sealing in low temperature and low pressure applications
Gambit AF-300 220 100 Elastic sheet,recommended for water and steam installations.
Gambit AF-400 260 120 High parameter sheet, for use in supervised joints, and installations for transmission of natural gas.
Gambit AF-1000 250 120 Used in high temperature flange joints, used in automotive industry
Gambit SOFT 130 30 Elastic sheet for application in low parameter installations.
Gambit AF-CD 140 80  Recommended mostly for heating installations and water supply mains, with both hot and cold water.
Gambit AF - U 200 100 For sealing in medium temperature and medium pressure applications.
Gambit AF-Oil 230 100 Oil-resistant gasket sheet, recommended for high temperatures and pressures. 
Gambit AF CHEMACID 150 40 Acid and alkali resistant. Recommended mostly for applications in chemical sector.
PARO-Gambit 350 100 High performance sheet, recommended mostly for installations working with steam.
Gambit AF - MF 280 120 High-parameter, oil-resistant gasket sheet.
GAMBIT MAGNUM 260 120 Recommended to applications in water, steam, kerosene, fuels, oils, salt solutions, weak acids and alkaline, natural gas, propane-butane.
GAMBITGRAF LUX 550 120 Applied in high temperature and pressure.

Note: Maximum temperature and pressure values can not be used simultaneously..

Gambit AF-153
Gambit AF-153 gasket sheet.

Type: 230

Application:

Low-parameter sheet, recommended mostly for water supply and sewage mains.

It is not recommended that maximum temperature and pressure are applied simultaneously.

(Values as detailed in table refer to 2.0 mm thick gasket sheets)

Materials:

Gasket sheet GAMBIT AF-153 is based on natural fibres, mineral fibres, and fillers bound with NBR, NR and SBR
rubber-based binder. 

 

Designation according to DIN 28091-2: FA-MN13-O
Admissions / Certificates WRAS, PZH
Maximum working conditions:
Peak temperature °C 180
Temperature under continuous operation °C 155
Temperature under continuous operation with steam °C 130
Pressure MPa 4
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 1,9 DIN 28090-2
Transverse tensile strength min (min.) MPa 5 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 20 DIN 52913
Color light green

 

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-200 G
Gambit AF-200 G gasket sheet.

Type: 227

Application::

High parameter sheet, containing special combination of aramide fibres and graphite. The sheet features high elasticity. Recommended for applications with steam.
Water, fuel, and oil resistant, among others.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-200G is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates

 

Designation according to DIN 28091-2: FA-AM1-O
Admissions / Certificates GOST R
Maximum working conditions:
Peak temperature °C 380
Temperature under continuous operation °C 320
Temperature under continuous operation with steam °C 250
Pressure MPa 8
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 1,9 DIN 28090-2
Transverse tensile strength min (min.) MPa 9 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 25 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 30 DIN 52913
Increase in thickness:
oil IRM 903 150oC/5h (max) % 5 ASTM F146
Model fuel B 20oC/5h (max) % 6 ASTM F146
Color graphite

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-200 Universal
Gambit AF-200 Universal gasket sheet.

Type: 215

Application::

Versatile, oil resistant sheet designed for applications with the majority of media under medium temperatures and pressures. Environmentally friendly sheet type, free from N-nitrosamines.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-200 Universal is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.

KEVLAR® ® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AM1-O
Admissions / Certificates DVGW, Germanischer Lloyd, INIG, KTW
Maximum working conditions:
Peak temperature °C 300
Temperature under continuous operation °C 220
Temperature under continuous operation with steam °C 180
Pressure MPa 6
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 7 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 55 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 22 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 28 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 5 ASTM F146
Model fuel B 20ºC/5h (max) % 5 ASTM F146
Color red

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-202
Gambit AF-202 gasket sheet.

Type: 212

Application::

Popular sheet designated for sealing in low temperature and low pressure applications. Particularly recommended for fuel oil installations.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-202 is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AM1-O
Maximum working conditions:
Peak temperature °C 200
Temperature under continuous operation °C 180
Temperature under continuous operation with steam °C 150
Pressure MPa 4
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 6 DIN 52910
Compressibility % 11 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 20 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 25 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 12 ASTM F146
Color khaki

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-300
Gambit AF-300 gasket sheet.

Type: 225

Application::

Elastic sheet easily following all the curves and irregularities of a fl ange. Particularly recommended for water and steam installations, in heating and power generation sector, as well as in municipal companies. The sheet is resistant to brake and cooling liquids, thus it is recommended for automotive applications.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-300 is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR, NR and SBR rubber-based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AM13-O
Admissions / Certificates INIG, GOST R
Maximum working conditions:
Peak temperature °C 320
Temperature under continuous operation °C 280
Temperature under continuous operation with steam °C 220
Pressure MPa 10
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 8 DIN 52910
Compressibility % 11 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 22 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 28 DIN 52913
Color yellow

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-400
Gambit AF-400 gasket sheet.

Type: 245

Application::

High parameter sheet, made of top quality materials. Highly reliable, with broad range of applications. Designated for use in supervised joints, and installations for transmission of natural gas. Resistant to water, steam, kerosene, fuel, oil, and solutions of salts, among others.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-400 is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AM1-O
Admissions / Certificates INIG, GOST R, TA Luft (VDI 2200)
Maximum working conditions:
Peak temperature °C 400
Temperature under continuous operation °C 350
Temperature under continuous operation with steam °C 260
Pressure MPa 12
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 12 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 55 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 30 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 35 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 6 ASTM F146
Model fuel B 20ºC/5h (max) % 6 ASTM F146
nafta 20ºC/24h (max) % 5 ASTM F146
Color blue

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-1000
Gambit AF-1000 gasket sheet.

Type: 226

Application:

Used in high temperature flange joints, in systems with high fluctuations in pressure and medium flow rate. Features high mechanical resistance. Can be used in automotive industry. It is not recommended with acids and alkali. When working with steam mind using suitable mounting clamps. Water, steam, kerosene, gasoline, fuel, and oil resistant.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-1000 is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder; reinforced with galvanized steel mesh.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates

 

Designation according to DIN 28091-2: FA-AM1-ST
Admissions / Certificates Germanischer Lloyd, GOST R
Maximum working conditions:
Peak temperature °C 420
Temperature under continuous operation °C 350
Temperature under continuous operation with steam °C 250
Pressure MPa 12
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2,2 - 2,45 DIN 28090-2
Compressibility % 9 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 32 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 35 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 8 ASTM F146
Model fuel B 20ºC/5h (max) % 7 ASTM F146
nafta 20ºC/24h (max) % 6 ASTM F146
Color graphite

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit SOFT
Gambit SOFT gasket sheet.

Type: 213

Application::

Elastic sheet for application in low parameter installations. Particularly recommended for heating, water supply and sewage installations. Remains tight with low bolt load.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT SOFT is based on natural fibres, mineral fibres, and fillers bound with NR rubber-based binder

 

Designation according to DIN 28091-2: FA-N1-O
Maximum working conditions:
Peak temperature °C 180
Temperature under continuous operation °C 150
Temperature under continuous operation with steam °C 130
Pressure MPa 3
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 1,8 DIN 28090-2
Transverse tensile strength min (min.) MPa 4 DIN 52910
Compressibility % 18 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Color sky blue

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-CD
Gambit AF-CD  gasket sheet.

Type: 223

Application::

Based on natural fibres the sheet is recommended mostly for heating installations and water supply mains, with both hot and cold water. It is also dedicated to sewage mains and industrial water cycles.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-CD is based on natural fibres, mineral fibres, and fillers bound with NBR rubber-based binder.

 

Designation according to DIN 28091-2: FA-N1-O
Admissions / Certificates PZH
Maximum working conditions:
Peak temperature °C 200
Temperature under continuous operation °C 160
Temperature under continuous operation with steam °C 140
Pressure MPa 8
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 1,8 DIN 28090-2
Transverse tensile strength min (min.) MPa 7 DIN 52910
Compressibility % 11 ASTM F36
Elastic recovery - min. % 55 ASTM F36
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 20 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 5 ASTM F146
Color beige

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF - U
Gambit AF - U gasket sheet.

Type: 232

Application::

Sheet designated for sealing in medium temperature and medium pressure applications. Specially designed for drinking water installations. Water, steam, kerosene, fuel, and oil resistant, among other media.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-U is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AM1-O
Admissions / Certificates TA Luft (VDI 2440), GOST R
Maximum working conditions:
Peak temperature °C 350
Temperature under continuous operation °C 250
Temperature under continuous operation with steam °C 200
Pressure MPa 10
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 8 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 22 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 28 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 8 ASTM F146
Model fuel B 20ºC/5h (max) % 8 ASTM F146
Color light blue

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF-Oil
Gambit AF-Oil gasket sheet.

Type: 235

Application::

Oil-resistant gasket sheet, recommended for high temperatures and pressures. Designed for application in supervised joints. Suitable for natural gas and drinking water installations. Also recommended for applications with water, steam, fuels, oils, brine, natural gas, propane butane.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

The GAMBIT AF-OIL gasket sheet is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with NBR rubber-based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AM1-O
Admissions / Certificates DVGW, Germanischer Lloyd, BAM, TA Luft (VDI 2200), GOST R
Maximum working conditions:
Peak temperature °C 350
Temperature under continuous operation °C 300
Temperature under continuous operation with steam °C 230
Temperatura minimalna °C -60
Pressure MPa 10
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8;1,0; +/- 0,1
1,5; 2,0; 2,5; 3,0; +/- 0,1
4,0; 5,0; 6,0 +/- 0,15
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 9 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 55 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 29 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 35 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 6 ASTM F146
Model fuel B 20ºC/5h (max) % 6 ASTM F146
Kerosene 20ºC/24h (max) % 5 ASTM F146
Color green

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF CHEMACID
Gambit AF CHEMACID gasket sheet.

Type: 240

Application::

Acid and alkalis resistant. Recommended mostly for applications in chemical sector

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet GAMBIT AF-CHEMACID is based on Kevlar® aramide fibres, mineral fibres, and fillers bound with CSM rubber-based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.

 

Designation according to DIN 28091-2: FA-AMZ-O
Maximum working conditions:
Peak temperature °C 200
Temperature under continuous operation °C 150
Pressure MPa 4
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 9 DIN 52910
Compressibility % 9 ASTM F36
Elastic recovery - min. % 50 ASTM F36
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 25 DIN 52913
Increase in thickness:
40% HNO3 23oC/18h (max) % 8 ASTM F146
65% H2SO4 23oC/48h (max) % 10 ASTM F146
Color light beige

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
PARO-Gambit
PARO-Gambit gasket sheet.

Type: 246

Application::

High performance sheet, recommended mostly for installations working with steam.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gasket sheet PARO-GAMBIT is based on carbon fibres, mineral fibres, and fillers bound with NBR rubber-based binder.

 

Designation according to DIN 28091-2: FA-CM1-O
Maximum working conditions:
Peak temperature °C 450
Temperature under continuous operation °C 350
Temperature under continuous operation with steam °C 350
Pressure MPa 10
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; 3,0; +/- 10%
4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 1,9 DIN 28090-2
Transverse tensile strength min (min.) MPa 10 DIN 52910
Compressibility % 11 ASTM F36
Elastic recovery - min. % 55 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 32 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 35 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 12 ASTM F146
Color ginger

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
Gambit AF - MF
Gambit AF - MF gasket sheet.

Application::

High-parameter, oil-resistant gasket sheet, thanks to the bio-soluble mineral fibres features higher thermal resistance, especially while working with steam. Highly recommended to applications with water, steam, kerosene, fuels and oils.

It is not recommended that maximum temperature and pressure are applied simultaneously.

Values as detailed in table refer to 2.0 mm thick gasket sheets

Material:

Gambit AM-MF gasket sheet is based on bio-soluble mineral fibres, Kevlar® fibres and fillers bonded with an NBR - based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates

 

Designation according to DIN 28091-2: FA-AM1-O
Admissions / Certificates INIG, GOST R, TA Luft (VDI 2200)
Maximum working conditions:
Peak temperature °C 400
Temperature under continuous operation °C 350
Temperature under continuous operation with steam °C 280
Pressure MPa 12
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; +/- 10%
3,0; 4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 2 DIN 28090-2
Transverse tensile strength min (min.) MPa 9 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 55 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 29 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 34 DIN 52913
Increase in thickness:
oil IRM 903 150ºC/5h (max) % 6 ASTM F146
Model fuel B 20ºC/5h (max) % 6 ASTM F146
Color sand

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
GAMBIT MAGNUM
GAMBIT MAGNUM gasket sheet.

GAMBIT MAGNUM

Application::

GAMBIT MAGNUM gasket sheet features higher elasticity in higher temperatures and higher resistance media. It is recommended to applications in water, steam, kerosene, fuels, oils, salt solutions, weak acids and alkalis, natural gas, propane-butane.

GAMBIT MAGNUM® gasket sheet is a combination of selected unique yarns, fillers and rubber. The high-capacity aramid and mineral fibres, together with nano-fillers and selected rubber composition that create discontinuous phase and a specific method of cross-linking make the sheet structure different from the standard yarn-elastomer sheets. Sealing goods made of this sheet maintain high elasticity in higher temperatures and resistance to media than the standard sheets, which extend its life-cycle.

Material:

GAMBIT MAGNUM gasket sheet is based on KEVLAR®, aramid fibres and fillers/nano-fillers bonded with an HNBR rubber-based binder.

Kevlar® is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates

 

Designation according to DIN 28091-2: FA-AMZ-O
Maximum working conditions:
Peak temperature °C 420
Temperature under continuous operation °C 370
Temperature under continuous operation with steam °C 260
Pressure MPa 12
Dimensions:
Standard thicknesses of sheets
(thicknesses above 4.0 mm are produced by gluing)
mm 0,3; 0,5; 0,8; +/- 0,1
1,0;1,5; 2,0; 2,5; +/- 10%
3,0; 4,0; 5,0; 6,0 +/- 10%
Standard dimensions of sheets
(custom dimensions available within the total range of 1500x3000)
mm 1500x1500 +/- 10,0
Physical and Chemical Properties:
Density (+/- 5 %) g/cm3 1,8 DIN 28090-2
Transverse tensile strength min (min.) MPa 8 DIN 52910
Compressibility % 10 ASTM F36
Elastic recovery - min. % 45 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 30 DIN 52913
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 32 DIN 52913
Increase in thickness:
Oil IRM 903 150ºC/5h (max) % 3 ASTM F146
Model fuel B 20ºC/5h (max) % 5 ASTM F146
Kerosene 20ºC/24h (max) % 3 ASTM F146
Color orange

Diagram P - T (Pressure-temperature)

Diagram P - T (Pressure-temperature)

Notes:
It is not recommended that maximum temperature and pressure are applied simultaneously.
Pressure to temperature correlation for sheet thickness 2.0 mm is shown in the diagram.
GAMBITGRAF LUX
GAMBITGRAF LUX gasket sheet.

Application::

Applied in high temperature and pressure. Recommended to steam, carbohydrates and most of chemical compounds except strong oxidants. Resistant to mechanical and thermal cycles as well as to rapid changes of temperature.

Material:

99.5% pure expanded graphite foil, reinforced with 0.1mm thick AISI 316L perforated metal sheet.
Sulphur content ‒ max. 300 ppm.
Chlorides content ‒ max. 50 ppm.

 

Designation according to DIN 28091-2: GR-10-0-1M-Cr
Maximum working conditions:
Temperature under continuous operation °C 500
Temperature under continuous operation with steam °C 550
Pressure MPa 12
Dimensions:
Standard thicknesses of sheets 
mm 1,0;1,5; 2,0; 3,0; +/- 10%
Standard dimensions of sheets
mm 1000x1000
1500x1500
+/- 20,0
Physical and Chemical Properties:
Thickness mm 1,5  
Graphite density (+/- 5 %) g/cm3 1,0 DIN 28090-2
Transverse tensile strength min (min.) MPa 20 ASTM F152
Compressibility % 35 - 45 ASTM F36
Elastic recovery - min. % 15 - 20 ASTM F36
Residual stresses 50MPa/16h/300ºC/ (min.) MPa 38 BS 7531
Residual stresses 50MPa/16h/175ºC/ (min.) MPa 45 DIN 52913
Ash content % 0,5 DIN 51903
Color graphite

 

Notes:
Values as detailed in table refer to 1,5 mm thick gasket sheets.
 

While every attempt has been made to verify the source of the information, no responsibility is accepted for accuracy of data.

Information clause

What personal data are processed and who is their administrator?

When using our services, personal data that we process may be, for example, the IP address of your device, data obtained from cookies or similar mechanisms for recording information in Users' devices, as long as they allow you to identify you. More information about the scope of personal data and cookies can be found in the Cookies policy and in Privacy policy.

Administrator, ie the entity deciding on which personal data will be processed and for what purpose, and in what way, is Continental Trade Sp. z o.o. (hereinafter "Continental Trade" or "We") with its registered office and address in Warsaw at Krasnobrodzka Street 5.

What is the purpose and basis of the processing of your personal data by Continental Trade ?

Continental Trade processes your personal data to enable you to use our services, match the displayed content and ads to your interests, measure quality and effectiveness, improve content and services.

The basis for the processing of personal data is the legitimate interest of Continental Trade. It includes improving services, ensuring their best quality and informing Users about them.

Confirming that you have read this information,   by clicking on "Go to website" or closing this window at the same time you agree that your personal data will be processed in the same way as described here. You can manage your consent, including withdrawal.

Providing personal information is voluntary.

What are your rights to   Continental Trade in terms of processed data?

You can request from Continental Trade: access to data, rectification, deletion, transfer and, in some cases, processing restrictions, and you have the right to object to the processing of your personal data when personal data are processed on the basis of the legitimate interest of the administrator. You have the right to file a complaint regarding the processing of your personal data to the President of the Office of Personal Data Protection.

To whom does Continental Trade share your personal data?

Continental Trade, in principle, does not share your personal data with third parties, except for situations in which Continental Trade has a legal basis, including at the request of authorized entities, or when it is necessary to perform services offered by Continental Trade, e.g. entrepreneurs providing hosting of our services.

How long does Continental Trade store your personal data?

Continental Trade stores Users' personal data only for the time that is necessary to achieve the purposes for which the data was collected and provided that one of the legal grounds described above is up-to-date or when a new ground has appeared, e.g. a law or the need to enforce claims in court proceedings.

Who can you contact for more information on the processing of personal data by Continental Trade?

If you have questions related to the processing of your personal data on websites operated by Continental Trade or would like to report the issue related to the processing of personal data by Continental Trade, you can contact a Continental Trade representative using the contact information: office@continentaltrade.com.pl.

More information on the protection of your personal data can be found in the Cookie Policy and Security Policy documents published on our website www.continentaltrade.com.pl