Continental Trade Sp. z o. o.

Sealing

Temac gasket sheet

General Information

Sheets dimensions:
standard:  1,5 x 1,5 m or 1,5 x 1,0 m.
Other dimensions are available upon request.

Range of thicknesses:
standard: 0,4; 0,5; 0,8; 1,0; 1,5; 2,0; 3,0; 4,0; 5,0 mm 
with wire insertion: 0,8; 1,0; 1,5; 2,0; 3,0; 4,0; 5,0 mm

Thickness tolerances:
0,4 – 0,8 ± 0,1 mm
1,0 – 5,0 ± 10 %

Surface:
All jointings are produced with an antistick surface on one side.

Quick selection table

Name Temperature
max. [°C]
Pressure
max. [bar]
Application
Temafast Economy 140 40 General at lower parameters
Temafast 140 40 General at lower parameters
Temasil – new generation 250 100 Petrochemical, chemical and food industries, wide area of machinery.
Temasil HT 330 150 Petrochemical, chemical and food industries, wide area of machinery.
Temaplus 250 130 Suitable for oils, fuels, lubricants, alcohol, gases, hydrocarbons, cooling liquids and most diluted acids and alkalis.
Temacarb 250 100  For use under alkaline conditions, with good steam resistance.  Suitable for applications with oils, fuels, alkalis medium and refrigerants.
Graftem Economy 200 80 Suitable for many applications including fuel, oil, coolants, hydrocarbons, gas and steam.
Temacid 150 150 Suitable for most acids alkalis, oils, fuels and refrigerants.

Note: Maximum temperature and pressure values can not be used simultaneously..

Temafast Economy

General Information

Color Yellow Temafast Economy
Wire insertion No
Description The economic version of jointing manufactured from mixture of organic fibres with mixture NBR/ SBR rubber binder.
Range usage This grade has wide area usage in all sorts of industries at lower parameters
Certification Germanischer LIoyd, KTW, GOST, PZH

Technical data

Marking acc. DIN 28 091-2   FA-Z-12-0
Marking acc. ASTM  F 104   F712 120 M4
Max. temperature * peak °C 210
  continual °C 140
Max. pressure *   Bar 40

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,7-2,1
Compressibility ASTM  F 36  % 12
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 20
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,1
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 15
ASTM Fuel B (5h/23°C) ASTM  F 146 % 15

 

Temafast Economy

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory 

 

Temafast

General Information

Color Red Temafast
Wire insertion No
Description

Basic jointing manufactured from organic fibres with NBR binder.

Range usage This grade has wide industrial usage at lower medium temperature and pressure parameters.
Certification Germanischer LIoyd, KTW, GOST, PZH

Technical data

Marking acc. DIN 28 091-2   FA-MZ-1-0
Marking acc. ASTM  F 104   F712 120 M4
Max. temperature * peak °C 210
  continual °C 140
Max. pressure *   Bar 40

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,6-1,9
Compressibility ASTM  F 36  % 18
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 20
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,1
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 5
ASTM Fuel B (5h/23°C) ASTM  F 146 % 10

 Temafast

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory
Temasil – new generation

General Information

Color Blue Temasil – new generation
Wire insertion Yes
Description

Superior performance copressed jointing material incorporating a blend of special heat resistant aramid fiber and high quality nitrile rubber binder. Completely fresh ecological type of sheets suitable for elevated temperature and steam applications, exhibiting excellent gas sealability

Range usage Due to its composition of high qualtiy raw materials, this particular grade is used in petrochemical, chemical and food industries, wide area of machinery. It is suitable for oils, fuels, lubricants, alcohol, gases, hydrocarbons, water, cooling liquids, and most diluted acids and alkalies
Certification Germanischer Lloyd, BAM, DVGW, TA Luft, PZH

Technical data

Marking acc. DIN 28 091-2   FA-MA-1-0 (ST)
Marking acc. ASTM  F 104   F712 111 M5 (M7)
Max. temperature * peak °C 400
  continual °C 250 (steam 200)
Max. pressure *   Bar 100

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,7-2,0
Compressibility ASTM  F 36  % 10
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 30
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,06
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 3
ASTM Fuel B (5h/23°C) ASTM  F 146 % 5

Temasil – new generation

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory
Temasil HT

General Information

Color Light blue Temasil HT
Wire insertion Yes
Description

Superior performance compressed jointing material incorporating a blend of special heat resistant aramid fiber and high quality nitrile rubber binder. Completely fresh ecological type of sheets suitable for elevated temperature and steam applications, exhibiting excellent gas sealability

Range usage Due to its composition of high quality raw materials, this particular grade is used in petrochemical, chemical and food industries, wide area of machinery. It is suitable for oils, fuels, lubricants, alcohol, gases, hydrocarbons, water, cooling liquids, and most diluted acids and alkalies
Certification Germanischer Lloyd, BAM, DVGW

Technical data

Marking acc. DIN 28 091-2   FA-A-1-0 (ST)
Marking acc. ASTM  F 104   F712 111 M6 (M7)
Max. temperature * peak °C 450
  continual °C 330 (steam 250)
Max. pressure *   Bar 150

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,7-2,0
Compressibility ASTM  F 36  % 10
Recovery ASTM  F 36 % 55
Residual stress (175°C) DIN 52 913 ≈ MPa 32
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,04
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 3
ASTM Fuel B (5h/23°C) ASTM  F 146 % 5

 Temasil HT

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory
Temaplus

General Information

Color Green Temaplus
Wire insertion Yes
Description

Superior performance jointing material incorporating a blend of special head resistant aramid fibres with a high quality NBR binder.

Range usage This gasketing sheet with excellent mechanical properties (high resistance to creep under elevated temperature and pressure) is suitable for oils, fuels, lubricants, alcohol, gases, hydrocarbons, cooling liquids and most diluted acids and alkalis.
Certification Germanischer LIoyd, UDT Poland, GOST

Technical data

Marking acc. DIN 28 091-2   FA-AM-1-0 (ST)
Marking acc. ASTM  F 104   F712 111 M6 (M7)
Max. temperature * peak °C 450
  continual °C 250 (steam 200)
Max. pressure *   Bar 130

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,6 – 1,9
Compressibility ASTM  F 36  % 10
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 32
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,03
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 3
ASTM Fuel B (5h/23°C) ASTM  F 146 % 5

 Temaplus

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory
Temacarb

General Information

Color Black Temacarb
Wire insertion Yes
Description

Premium quality carbon fibre reinforced material with a high quality nitrile rubber binder

Range usage A universal grade especially suitable for use under alkaline conditions, with good steam resistance. It also possesses excellent creep resistance and is suitable for applications with oils, fuels, alkalis medium and refrigerants.
Certification GOST

Technical data

Marking acc. DIN 28 091-2   FA-CA-1-0 (ST)
Marking acc. ASTM  F 104   F712 110 M6 (M7)
Max. temperature * peak °C 450
  continual °C 250 (steam 200)
Max. pressure *   Bar 100

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,5 – 1,9
Compressibility ASTM  F 36  % 9
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 32
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,05
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 3
ASTM Fuel B (5h/23°C) ASTM  F 146 % 5

 Temacarb

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory
Graftem Economy

General Information

Color Black Graftem Economy
Wire insertion Yes
Description

Economic non-asbestos gasketing sheet which combines graphite reinforced with aramid fibres and a low content of rubber binder system.

Range usage This jointing sheet with excellent mechanical properties is suitable for many applications including fuel, oil, coolants, hydrocarbons, gas and steam.
Certification GOST

Technical data

Marking acc. DIN 28 091-2   FA-AZ-1-0 (ST)
Marking acc. ASTM  F 104   F712 110 M5 (M7)
Max. temperature * peak °C 360
  continual °C 200 (steam 180)
Max. pressure *   Bar 80

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 1,8 – 2,1
Compressibility ASTM  F 36  % 5 – 15
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 30
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,1
Fluid resistance - thickness increase
Oil IRM 903 (5h/150°C) ASTM  F 146 % 5
ASTM Fuel B (5h/23°C) ASTM  F 146 % 10

 Graftem Economy

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory
Temacid

General Information

Color Light grey Temacid
Wire insertion No
Description

Premium quality acid jointing gasket material based on a blend of fibres with a special binder system.

Range usage A chemical grade material suitable for most acids alkalis, oils, fuels and refrigerants.
Certification GOST

Technical data

Marking acc. DIN 28 091-2   FA-A-4Z-0 (ST)
Marking acc. ASTM  F 104   F712 122 M5
Max. temperature * peak °C 200
  continual °C 150
Max. pressure *   Bar 40

*Maximum temperature and pressure values can not be used simultaneously.

Typical parameters of 2 mm thickness

Density DIN 28090-2  g/cm³ 11,7 – 2,1
Compressibility ASTM  F 36  % 10
Recovery ASTM  F 36 % 50
Residual stress (175°C) DIN 52 913 ≈ MPa 20
Gas leakage λ2,0  DIN 3535-6/99 ≈ mg/(m*s) 0,1
Fluid resistance - thickness increase
SULPHURIC ACID 48h/23°C 65% ASTM  F 146 % 8
NITRIC ACID 18h/23°C 40% ASTM  F 146 %

10

 Temacid

  1. suitable area (even for steam application)
  2. suitable extended area, technical advice is recommended
  3. for this area technical consultation is mandatory

While every attempt has been made to verify the source of the information, no responsibility is accepted for accuracy of data.

Information clause

What personal data are processed and who is their administrator?

When using our services, personal data that we process may be, for example, the IP address of your device, data obtained from cookies or similar mechanisms for recording information in Users' devices, as long as they allow you to identify you. More information about the scope of personal data and cookies can be found in the Cookies policy and in Privacy policy.

Administrator, ie the entity deciding on which personal data will be processed and for what purpose, and in what way, is Continental Trade Sp. z o.o. (hereinafter "Continental Trade" or "We") with its registered office and address in Warsaw at Krasnobrodzka Street 5.

What is the purpose and basis of the processing of your personal data by Continental Trade ?

Continental Trade processes your personal data to enable you to use our services, match the displayed content and ads to your interests, measure quality and effectiveness, improve content and services.

The basis for the processing of personal data is the legitimate interest of Continental Trade. It includes improving services, ensuring their best quality and informing Users about them.

Confirming that you have read this information,   by clicking on "Go to website" or closing this window at the same time you agree that your personal data will be processed in the same way as described here. You can manage your consent, including withdrawal.

Providing personal information is voluntary.

What are your rights to   Continental Trade in terms of processed data?

You can request from Continental Trade: access to data, rectification, deletion, transfer and, in some cases, processing restrictions, and you have the right to object to the processing of your personal data when personal data are processed on the basis of the legitimate interest of the administrator. You have the right to file a complaint regarding the processing of your personal data to the President of the Office of Personal Data Protection.

To whom does Continental Trade share your personal data?

Continental Trade, in principle, does not share your personal data with third parties, except for situations in which Continental Trade has a legal basis, including at the request of authorized entities, or when it is necessary to perform services offered by Continental Trade, e.g. entrepreneurs providing hosting of our services.

How long does Continental Trade store your personal data?

Continental Trade stores Users' personal data only for the time that is necessary to achieve the purposes for which the data was collected and provided that one of the legal grounds described above is up-to-date or when a new ground has appeared, e.g. a law or the need to enforce claims in court proceedings.

Who can you contact for more information on the processing of personal data by Continental Trade?

If you have questions related to the processing of your personal data on websites operated by Continental Trade or would like to report the issue related to the processing of personal data by Continental Trade, you can contact a Continental Trade representative using the contact information: office@continentaltrade.com.pl.

More information on the protection of your personal data can be found in the Cookie Policy and Security Policy documents published on our website www.continentaltrade.com.pl